Emergency Department Flow Simulation

A running model of one day in an emergency department. Walk-ins sign in, see the triage nurse, register, wait for a bed, see a nurse and a provider, wait for tests and go home. Ambulance patients take bays first. Four switches change how the department works, and you can turn them on in any order, even halfway through the day.

Four changes, same staff

Fast track lets walk-ins see the triage nurse and register in one stop, and sends minor injuries to treatment chairs with their own nurses and PA. Protocols let the triage nurse order common tests right away, and give every nurse the same note format so the provider doesn’t ask the same questions again. Signals light up when a room is clean and when results are back, and send each lab sample as soon as it is taken. Flex to the load draws a surge line on the tracking board and moves staff to the busier area when the waiting room passes it.

Nobody is cut. With all four on, by the end of the day the wait to see a provider falls from 71 to 23 minutes, the average stay from 3 hours 12 minutes to 1 hour 17 minutes, and walk-outs from 9 to none. Staff time spent searching falls from about five and a half hours to under half an hour.

What you can click

Click any patient to follow their visit, with care in green and waiting in red. Click a nurse or doctor to see how their day splits between care, walking and searching. The Numbers panel shows each measure next to the same day with every switch off. Open the value stream map and click a step to see where it happens and who is in it right now.

Terms you can watch happen

  • Value stream map — the whole visit on one page, measured from today’s patients
  • Lead time — one walk-in followed from the front door to going home
  • Process time and delay time — the hands-on minutes and the waiting minutes of every step
  • Percent complete and accurate — how often a step starts with everything it needs
  • Rework — histories taken twice, blood drawn twice and papers sent back
  • Waste — waiting, walking and searching, counted for every patient and every staff member
  • Left without being seen — patients who give up in the waiting room
  • Door to provider — the wait from walking in to first seeing a doctor or PA
  • Stages of the visit — the front end, the middle and the back end, outlined on the floor
  • Combine processes — triage and a quick registration at one stop
  • Concurrent processes — registration at the bedside while the patient waits for the provider
  • Resequence — tests ordered at triage so results come back during the wait
  • Proceed until halted — a test ordered by protocol that the provider can stop
  • Service-level agreement — a turnaround the lab and X-ray agree to
  • Batching — blood samples carried to the lab every 30 minutes
  • Pull signal — a green light that calls the next patient into a clean bay
  • Visual management — a tracking board that shows every room at a glance
  • Level resource capacity — a surge line on the board that moves staff to the busier area
  • Standardized work — a nurse’s discharge step sheet, followed live
  • Shared resource — an X-ray tech who also covers the wards

Questions

What does this simulation show?
One day in an emergency department, from 7:00 to 19:00. About 90 people walk in and 14 arrive by ambulance. Four switches change how the department works: fast track, protocols, signals and flexing staff to the load. The staff and the patients are the same in every run, so you compare the same day before and after.
Are the numbers real?
They are made up, in the range that published emergency department data reports. Every number on screen is measured from the running model, never typed in: the time to see a provider, the length of stay, the walk-outs, and how often each step has everything it needs. It is a teaching model, not a staffing calculator.
Why don’t the changes cut staff?
In an emergency department the payoff is patient time and safety. With all four switches on, the same staff see patients sooner, fewer people walk out, and nurses and doctors spend less time searching and doing work twice.
Why does one switch on its own not help much?
Each change moves the wait somewhere else until the others catch up. Fast track on its own empties the waiting room, but the fast-track chairs then fill with patients waiting for results, so the stay stays about the same. Signals and protocols remove that wait.
Can I use this to teach a class?
Yes. It runs in the browser on a computer, a tablet or a phone, with no sign-up. Click a patient to follow their visit, or a nurse to see their day and their standard work. Open the value stream map and click a step to see where it happens on the floor. Every term links to its written definition.

More like this in the lean games and simulations catalog, or see the same ideas in a factory in the lean factory simulation.